SILVER CARBO 6.2
High quality protective welding cover – high protection
SILVER CARBO® 6.2 is a dual-layer light protective blanket meant for the protection of environment and equipment during hot work (welding, cutting, the use of open flame). It is made from reinforced nonwoven carbon fibers and 96% silica fibers. The cover is protected on the underside by an anti-abrasive coating, lined with reinforced aramid thread as well as equipped with nickeled brass rings at the corners.
The upper layer is made of light reinforced and fireproof carbon fibers, which insulate the heat from spraying particles of molten metal excellently and are fireproof to a temperature of 1250°C for up to 30 seconds. The lower layer is resistant to a constant temperature of 1000°C, can withstand much higher temperatures for shorter time periods and has a melting point of 1600°C.
SILVER CARBO® 6.2 adheres to the following international standards:
- BS 476 part 4 ,part 7 class 1,class0
- ISO 4589,ASTM 2863,LOI 40%
Products and dimensions
| length (m) | width (m) | thickness (mm) | |
| SILVER CARBO 091 1500 65 | 1.5 | 0.91 | 6.2 |
| SILVER CARBO 091 2000 65 | 2.0 | 0.91 | 6.2 |
| SILVER CARBO 150 1500 65 | 1.5 | 1.50 | 6.2 |
| SILVER CARBO 150 2000 65 | 2.0 | 1.50 | 6.2 |
*other dimensions to order
Color: black brown
Density: 420 -600 / 1150 gr/ m2
Ring size: o 12mm
*note
The technical data shows the approximate area of product use and must not be regarded as a warranty. Caution and control when performing hot work are always necessary.
Technical data
SILVER_CARBO_6_3_Technical_data (.pdf 416KB)
SILICA TLW 211
| Weight gr/m2 | 1150 |
| Thickness mm | 1.2 |
| Weave | Satin |
| Conposition | 96% SiO2 |
| Thermal resistance | 1000°C |
| Melting point | 1600°C |
| Certificates | BS 476 Part 4 1970 |
| BS 476 Part 7 1997 | |
| Class 1, Class 0 |
CARBO oxide acrylon. carbon fibers
| weight gr/m2 | 200 |
| thickness mm | 5 |
| breaking point N/5cm | 90 |
| air permeability l/m2/s 200pa | 1400 |
| composition | carbon 62% |
| nitrogen 21.5% | |
| oxygen 12% | |
| electrical resistance Ohms cm | 8 x 10 ⁸ |
| flammability test oxygen index | ISO 4589, ASTM 2863 |
| LOI index % | 40+ |
| Fiber size micron | 12.5 |
Thread
Aramid
Side stripe
fiberglass 0.18
Rings
brass/nickel o12
